Beneficios
• The Syntex Kinematics Simulator eliminates risk, reduces engineering time, accelerates training, and enables real PLC-driven motion testing without any physical servos or drives.
• It is the fastest, safest, and most cost-effective way to develop and validate industrial motion ECOSYSTEMS like Allen-Bradley, Siemens, Codesys, and Beckhoff.
Descripción
Contenido
In our training, we focus on building real motion-control solutions, step by step, exactly that is done in the industry.
Everything you learn is practical, based on more than 16 years of real projects with drives, PLCs, and advanced motion systems.
With only small adjustments, you can move from a virtual setup to real hardware, and your sequence logic stays intact.
That’s exactly why you should use our simulator.
When you move to a real environment, you’ll understand the code, and you’ll solve problems faster.
Programa
- Yes, you will learn the basics:
- Timers, counters, compare instructions, math instructions, coils, and contacts.
- But you will also learn something more that most engineers never master: how to manipulate and configure real motion control.
- Automation is evolving quickly.
- Many new engineers try to learn everything from YouTube or by themselves - but soon they realize how much work, complexity, and understanding is actually required.
- That’s why we bring you our Syntex Motion Control Kinematics Simulator:
- A tool that allows you to experiment, practice, and build real solutions without risking equipment or needing a full hardware setup.
- With this Tool that we developed gives you a solid technical path to start your motion-control career the right way to standardize your code like a real professional.
- This is not just training.
- This is the foundation to create your own motion-control solutions with confidence.
- No maintenance
- No damaged servos
- No risk of collision
- Validating motion instructions
- Debugging sequences
- Testing interpolation (linear & circular)
- Testing Sync Motion Master/Slave
- Testing motion paths
- Creates high-level talent with zero risk.
- Boost the beginners confidence of the automation personnel.
- All benefits of physical hardware without high investment, space, or risk.
- The Syntex Motion Simulator is designed to operate only with physical PLC, ensuring that all motion logic, timing, and behavior correspond exactly to real industrial environments.
- To use the simulator, the customer must connect a real PLC.
- This guarantees:
- Real scan cycle behavior
- Real task scheduling
- Real motion command execution
- Real deterministic timing
- Real safety and interlock logic
- This makes the simulator behave like a real machine without the hardware.
- Fixed IP Address for Secure Operation
- The simulator is configured to communicate with one specific IP address assigned to your PLC.
- If the PLC does not match the assigned IP and serial number from your PLC the interface will not activate.
- This provides:
- Security (only the authorized PLC can drive the simulation)
- Stability (always the same communication endpoint)
- Reliability (no accidental connections to other devices)
- Protection of internal logic
- Protected System Routines for Correct Functionality
- Visualization and HMI interface
- IP Adress
- Serial Number from your PLC
- Fully Open Motion Code for Testing & Development
- While core system routines are protected, the motion logic IS 100% OPEN so the user can:
- Develop their own motion sequences
- Test Motion Instruction
- Create multi-axis sequences
- Experiment with sync motion
- Execute interpolation paths
- Tune acceleration/velocity profiles
- Debug & commissioning logic before touching real hardware
- The user programs the PLC as if controlling real servos. The simulator acts as the hardware — but without any risk.
- All without buying:
- Servos
- Drives
- Power modules
- Panels
- Safety equipment
- Wiring
- Mechanical structures
- A complete motion testing machine — but fully virtual.
Curso
Allen Bradley Simulator
Duración
This simulator allows you to learn, practice, and advance at your own pace
Datos importantes
- You must accept the Syntex Systems End-User License Agreement (EULA) to use this simulator
- Cost: 1,899.00 USD
